Wuxi Lima Chemical Machinery Co.,Ltd

    Wuxi Lima Chemical Machinery Co.,Ltd

    Address: No.558 Jinhui Rd., Wuxi, Jiangsu, China

    Contact: WangZhiYong

    TEL: 86-13255218018

    Fax: 86-510-83111329

    Mobile phone:+86-13255218018



Home > News > Content

Scraper Thin Film Evaporator In The Field Of International Level With The Leading Position

Wuxi Lima Chemical Machinery Co.,Ltd | Updated: Dec 19, 2017

Thin film evaporator with a built-in distributor, the material directly from the duct into the cylindrical evaporation chamber. The material was forced flowing along the heating surface.

The scraper-type thin-film evaporator is a high-efficiency evaporation and distillation equipment that uses high-speed rotation to distribute the liquid into a uniform film for evaporation or distillation. It can also perform unit operations such as deodorization, defoaming reaction and heating and cooling. , West Pharmaceutical, food, light industry, petroleum, chemical, environmental protection and other industries.

Centrifugal scraper thin film evaporator using advanced foreign technology, scraping film evaporator in the domestic area with the international level of leading position.

Performance and features

The use of centrifugal sliding groove rotor, is the latest foreign structure evaporator, in the case of small flow can also form a thin film in the barrel evaporation wall attached to the inner wall of the treatment liquid can be rapidly removed by the movable scraper , And fixed-gap scraper evaporator, evaporation can be increased 40-69%, it has the following properties and characteristics:

1, high heat transfer coefficient, evaporation capacity, evaporation intensity can reach 200kg / m2 · hr, high thermal efficiency.

2, the material heating time is short, about 5 seconds to 10 seconds, and work under vacuum conditions, more favorable for heat-sensitive materials, to maintain a variety of ingredients does not produce any decomposition, to ensure product quality.

3, to adapt to a wide range of viscosity changes, high and low viscosity materials can be handled, the material viscosity can be as high as 100,000 cps (CP)

4, change the scraper groove rotation direction, you can adjust the material in the evaporator care time.

5, Evaporation section of the cylinder wall after precision boring and polishing, the surface is not easy to produce coking, scaling.

6, easy to operate, easy adjustment of product indicators, in confined conditions, can be controlled for continuous production.

7, equipment covers an area of small, simple structure, easy maintenance, easy to clean.

Contact Us
Address: No.558 Jinhui Rd., Wuxi, Jiangsu, China
Tel: +86-13255218018
Copyright © Wuxi Lima Chemical Machinery Co.,Ltd All rights reserved.