Wuxi Lima Chemical Machinery Co.,Ltd
Categories

    Wuxi Lima Chemical Machinery Co.,Ltd

    Address: No.558 Jinhui Rd., Wuxi, Jiangsu, China

    Contact: WangZhiYong

    TEL: 86-13255218018

    Fax: 86-510-83111329

    Mobile phone:+86-13255218018

    E-mail:sale@wuxilima.com

    www.wuxilima.net

Home > News > Content

Thin Film Evaporator Erformance Features

Wuxi Lima Chemical Machinery Co.,Ltd | Updated: Jun 28, 2017

Thin Film Evaporator erformance Features 

erformance Features Edit

Vacuum pressure drop:

Material vaporized gas from the heating surface to the external condenser, there is a certain pressure difference. In a typical evaporator, this pressure drop (Δp) is usually relatively high, and sometimes even highly difficult to accept. The scraper thin film evaporator has a larger gas through the space, the pressure inside the evaporator can be seen as almost equal to the pressure in the condenser, so the pressure drop is very small, the vacuum up to 5mmHg.

Low operating temperature:

Due to the above characteristics, this allows the evaporation process to be maintained at higher vacuum conditions. As the vacuum increases, the corresponding boiling point of the material decreases rapidly, so the operation can be carried out at lower temperatures, reducing the thermal decomposition of the product.

Short heating time:

Due to the unique structure of the scraper thin film evaporator, the scraper has the pumping action, which makes the residence time of the material in the evaporator very short. In addition, the high speed turbulence of the film on the heated evaporator makes the product not Surface of the device. Therefore, it is particularly suitable for the evaporation of heat-sensitive materials.

High evaporation strength:

The decrease in the boiling point of the material increases the temperature difference between the same medium and the heat medium. The function of the doctor blade reduces the thickness of the liquid film in the turbulent state and reduces the thermal resistance. At the same time, in this process to inhibit the material in the heating surface of the wall, scaling, and accompanied by good heat exchange, thus improving the scraper film evaporator total heat transfer coefficient.

Operational flexibility:

It is due to the unique properties of the scraper thin film evaporator, making it suitable for heat treatment and the need for smooth evaporation, high viscosity and with the concentration increase the viscosity of the rapid increase in the material, the evaporation process can also be a smooth evaporation. It can also be successfully applied to solid particles, crystallization, polymerization, scaling and other materials evaporation and distillation.

How to choose the type of editing

In the selection of thin film evaporator, we must consider a variety of factors, generally need to consider:

▲ production capacity and operating parameters: including the amount of processing, access concentration, temperature, the number of hours of operation;

▲ Product Features: including heat sensitivity, viscosity and fluidity (at operating temperature), foaming, solid content, crystallization and polymerization tendencies;

▲ operating medium: such as water vapor (pressure), cooling water (temperature), cleaning fluid (solvent), etc .;

▲ manufacturing of material selection and surface polishing requirements;

▲ site conditions: such as space, climate (outdoor), energy and product convergence, work platforms.

▲ regulations: including safety, noise, environmental protection and so on.


Contact Us
Address: No.558 Jinhui Rd., Wuxi, Jiangsu, China
Tel: +86-13255218018
 Fax:+86-510-83111329
 E-mail:sale@wuxilima.com
Copyright © Wuxi Lima Chemical Machinery Co.,Ltd All rights reserved.
Share: